IP Configuration Sequence

For Teledyne DALSA GigE Vision cameras IP (Internet Protocol) Configuration sequence to assign an IP address is executed automatically on camera power-up or when connected to a network. As a GigE Vision compliant device, the camera attempts to assign an IP address as follows.

For any GigE Vision device, the IP configuration protocol sequence is:

· Persistent IP (if enabled)

· DHCP (if a DHCP server is available)

· Link-Local Address (always enabled as default)

The factory default for Teledyne DALSA GigE Vision cameras is Persistent IP disabled and DHCP enabled with LLA always enabled as per the GigE Vision specification.